Follow

S2 Sensor Quick Start Guide

See attachment at the bottom for the full document

Purpose

This document is intended to help customers or partners with the initial configuration of Vectra S2 Sensor appliances. This is limited to basic network connectivity. The Quick Start Guide for your Vectra Brain provides similar guidance for your Brain. The Platform Quick Start Guide covers basic firewall rules needed, initial GUI settings, and pairing of physical Sensors. Virtual Sensor (VMware and Hyper-V) configuration and pairing and covered in their respective Quick Start Guides.

Contains

  • Package Contents
  • Physical Connections
    • Connections Required for Initial Configuration of MGT Port
    • Console Port Pinout
    • Additional Cabling Notes of Interest
  • S2 Initial Configuration
    • DHCP Quick Start
    • Static Addressing Quick Start
      • Configuration Checklist for Static Addressing
      • Access the Command Line Interface (CLI) of the S2 Sensor
      • Setting a Static IP Address
  • Worldwide Support Contact Information

 

 

Was this article helpful?
0 out of 0 found this helpful

Download PDF

0 Comments

Article is closed for comments.