M29 Quick Start Guide

See attachment at the bottom for the full document


This document is intended to help customers or partners with the initial configuration of Vectra M29 appliances. This is limited to basic network connectivity. The M29 appliance is used in place of a virtual machine for Vectra Stream deployment. From a pairing perspective, the M29 functions similarly to other Vectra physical Sensors. The Vectra Platform Quick Start Guide covers basic firewall rules needed, initial Brain GUI settings, and pairing of physical Sensors. Virtual Sensor (VMware and Hyper-V) configuration and pairing and covered in their respective Quick Start Guides.


  • Package Contents
  • Physical Connections (and disk numbering)
    • Connections Required for Initial Configuration of MGT Port
    • Additional Cabling/Racking Notes of Interest
  • M29 Initial Configuration
    • DHCP Quick Start
    • Static Addressing Quick Start
      • Configuration Checklist for Static Addressing
      • Accessing the Command Line Interface (CLI) of the M29 Appliance
      • Setting at Static IP Address
  • Worldwide Support Contact Information
Was this article helpful?
0 out of 0 found this helpful

Download PDF


Article is closed for comments.