S101 Sensor Quick Start Guide

See attachment at the bottom for the full document


This document is intended to help customers or partners with the initial configuration of Vectra S101 appliances. This is limited to basic network connectivity. The Quick Start Guide for your Vectra Brain provides similar guidance for your Brain. The S101 appliance can only be deployed in Sensor mode. Modes are discussed further in the Vectra Platform Quick Start Guide. The Vectra Platform Quick Start Guide covers basic firewall rules needed, initial Brain GUI settings, and pairing of physical Sensors. Virtual Sensor (VMware and Hyper-V) configuration and pairing and covered in their respective Quick Start Guides.


  • Package Contents
  • Physical Connections (and disk numbering)
    • Connections Required for Initial Configuration of MGT Port
    • Additional Cabling/Racking Notes of Interest
  • S101 Initial Configuration
    • DHCP Quick Start
    • Static Addressing Quick Start
      • Configuration Checklist for Static Addressing
      • Accessing the Command Line Interface (CLI) of the S101 Sensor
      • Setting a Static IP Address
  • Worldwide Support Contact Information
Was this article helpful?
0 out of 0 found this helpful

Download PDF

Have more questions? Submit a request


  • 0
    Jo Wegener

    100G Support is missing in the document, would be great if this could be updated.

Article is closed for comments.