Follow

Default username and passwords for Vectra appliances

The default username and password for the command line interface and web browser interface vary by software version.  The following table summarizes the default username/passwords for both.

Version Command-line Web browser IPMI/iDrac1
4.13 and earlier

Username: vectra

Password: youshouldchangethis

Username: admin

Password: youshouldchangethis

Username: ADMIN

Password: varies2

4.14, 5.0 to 5.3

Username: vectra

Password: changethispassword

Username: admin

Password: changethispassword

Username: ADMIN

Password: varies2

5.4 and later

Username: vectra

Password: changethispassword

Username: admin

Password: changethispassword

Username: vectra

Password: changethispassword

Note 1: IPMI and iDrac access levels vary by platform according to platform capabilities and security hardening requirements.  Dell iDrac access is available on X29 platforms with a serial number starting U22.  iDrac access gives basic platform monitoring and operational support capabilities over an IPMI compatible interface.

Note 2: IPMI support formally arrived in the 5.4 release.  The IPMI and iDrac passwords varied by platform and version prior to the 5.4 release.  If you require IPMI access to a system running a version prior to this release please contact Vectra Support for assistance.

Was this article helpful?
2 out of 2 found this helpful

Download PDF

Have more questions? Submit a request

0 Comments

Article is closed for comments.