Follow

Cybereason EDR FAQ

What is Cybereason EDR?

Cybereason EDR is a unified endpoint security platform for preventative protection, post-breach detection, automated investigation, and response.

Integration:

How does Cybereason EDR integrate with my Vectra platform?

Integration with Cybereason EDR adds host context to aid in host identification during a security investigation. When Detect sees a host session come online, it polls Cybereason EDR for host information. Host information may include the following:

  • Machine ID
  • Machine name
  • Operating system
  • Isolation status

Cybereason EDR host context is available under the Host Details tab of individual Host pages.

How do I enable the Cybereason EDR integration in Detect?

Cybereason Endpoint Security is configured under the EDR Integrations Tab. In your Detect UI, navigate to Settings -> EDR Integrations -> Cybereason:

  • Select Edit on the far right-hand side within the Cybereason row.
  • Toggle Enable integration with Cybereason to On.

mceclip0.png

  • Enter your Cybereason Endpoint Security HostnameUsername, and Password. The username and password should be for an account with permissions defined below. If you do not have this information, please check the section below on how to get this information correctly. The Hostname will be in the format hostname:port

mceclip1.png

  • Click Save.
  • Once the credentials have been validated, the UI will provide confirmation that your configuration has been saved.
  • Your Cybereason EDR setup is now complete.

Where can I find my Cybereason Information to integrate with Vectra?

To get credentials for Cybereason EDR for use with Vectra:

  • Log into your Cybereason Dashboard
  • Navigate to Settings > Registration Service
  • Here you will see all the Hostname with the Port. 

mceclip0.png

  • To get the Username please look at the top right corner of the dashboard to find your Username

mceclip3.png

  • The Password is the corresponding password to the Username
  • In order for the API to work properly ensure that the Username has the correct permissions according to this document: https://nest.cybereason.com/documentation/api-documentation/all-versions/required-permissions

Why do I not see Cybereason EDR as an External Connector?

Vectra introduced native integration support for Cybereason EDR in release version 6.8. Please make sure you are running Detect version 6.8 or greater. You can check the current software version by navigating to Settings -> General -> Version in the Detect UI.

Can I use Advanced search to query for Cybereason EDR hosts?

Right now, we do not have support for advanced search for Cybereason EDR host artifacts. We plan on releasing this feature in a coming releasing.

Can Cybereason EDR be used for Host Lockdown?

Yes, Detect release version 6.8 introduced support for Host Lockdown using Cybereason EDR.

Host Lockdown Information:

What is Host Lockdown?

Host Lockdown is a feature of Detect that gives users the ability to temporarily disable network hosts during a security investigation. Host Lockdown is enforced through the use of Cybereason Endpoint Security’s host isolation capabilities. Host Lockdown can run in an automated or manual mode. In automated mode, action is taken once privilege, threat and certainty score thresholds have been passed. In manual mode, a security analyst can isolate a host directly from a Detect Host page.

Why is disabling a host necessary during a security investigation?

Disabling a host isolates an attacker's machine from the network and prevents subsequent use of that machine for kill chain progression. Disabled hosts will limit an attacks blast radius, buying analysts critical time to conduct a thorough security investigation.

How does Host Lockdown work?

Host Lockdown requires Detect to be integrated with your Cybereason Endpoint Security system. When a Host Lockdown is instantiated, Detect will notify Cybereason Endpoint Security to isolate the host. 

How does a host get locked down?

There are two ways to utilize Host Lockdown:

  1. Manually, where a host is locked by a Detect user.
  2. Automatically, where Detect can be configured to automatically lock hosts based on configured Observed Privilege, Threat and Certainty score thresholds.

How do I manually lockdown a host?

Cybereason EDR enabled hosts will have a Host Lockdown widget in the sidebar of individual host pages. From there you can enable or disable Lockdown. Host can be manually locked from 1 hour up to 24 hours, in pre-configured time ranges. To lock a host, simply click the Disable Host button and select a pre-configured time range from the dropdown. The host will automatically be re-enabled once the selected time range has expired. Please note that enabling or disabling manual lockdown on a host will require the Detect user to have the Edit Host Lockdown RBAC permission enabled.

How do I automatically lockdown a host?

In Detect, navigate to Settings EDR Integrations Host Lockdown. From here you can enable the Host Lockdown feature itself, along with Automatic Lockdown and its required thresholds. Once you have enabled Automatic Lockdown, you will have the option to configure the automatic lockdown period, which can range from 1 hour up to 24 hours, in pre-configured time ranges, and set the Observed Privilege, Threat and Certainty score thresholds. After automatic Lockdown has been enabled, anytime a host's scores exceed the Observed Privilege, Threat and Certainty thresholds, the host will be isolated in the corresponding EDR for the configured time range.

mceclip4.png

Where can I check the lockdown status of a host?

All hosts will have a Host Lockdown widget in the sidebar of individual Host pages. From here you can see the host's current Lockdown status. If a host is locked down, the status will show time until the host is re-enabled and the username of the Detect user that enabled lockdown for that host. There is also an AP endpoint (/api/v2.1/lockdown/host) where you can pull a list of all current hosts that have been disabled via Lockdown. Please note that viewing Lockdown status will require the Detect user to have the View Host Lockdown RBAC permission enabled.

If a host gets locked down, will existing/open sessions be terminated?

Yes. Once a host gets isolated via Host Lockdown, the host gets isolated from the network so existing user sessions will timeout and, or terminate.

Once a host has been locked down, how can host isolation be removed?

Hosts may be removed from isolation via the following methods:

  • A user manually re-enables the host via Detect
  • Disable timer expires
  • The host is removed from isolation outside of Detect (in Cybereason)

If I update my automatic Lockdown thresholds, will all hosts be re-evaluated?

No, adjusting the Lockdown thresholds will not retroactively apply to existing host scores, only when new host scores are calculated.

Is there API support for Host Lockdown?

Yes, for reporting of isolated hosts only. We may add support for enabling or disabling of hosts in a future release.

GET /api/v2.1/lockdown/host
[
 {
   "host_id": 10,
   "locked_by": "admin",
   "unlock_date": "2020-06-09T15:21:06Z",
   "host_name": "def-1",
   "lock_date": "2020-06-09T14:21:06Z"
 }
]

If a host is isolated outside of Detect (via Cybereason) how does that appear in Detect?

The host's Lockdown status will indicate "Isolated from outside Cognito." Detect will always honor the state of isolation from the Cybereason side. If isolation is set from the remote end, the host will need to be removed from isolation from the remote end.

Will the end user be notified when their host is locked down?

No, the end user is not notified whenever their host is disabled.

Will Detect administrators be notified when a host is locked down?

Yes, Detect admins will see email and syslog notifications when lockdown is enabled or disabled. Please note that in order to receive Host Lockdown email notifications, Host alert emails notification must be enabled under Settings / Notifications.

Can I use advanced search to pull information on isolated hosts?

As of release version 6.8, Advanced search for Host Lockdown is not supported. We will introduce Advanced search support in a future release.

 

 

Was this article helpful?
0 out of 0 found this helpful

Download PDF

Have more questions? Submit a request

0 Comments

Article is closed for comments.